Product Specifications; Signal Input - Hitachi 37PD5000 User Manual

PRODUCT SPECIFICATIONS

Product specifications and designs are subject to change without notice.
Display
Approx. 37 inches (814 (H) x 445 (V) mm, diagonal 930mm)
dimensions
Panel
Resolution 1024 (H) x 1024 (V) pixels
Net dimensions
940 (W) x 573 (H) x 99 (D) mm
(excluding Speakers/Stand)
Net weight
29.0kg
(excluding Speakers/Stand)
Temperature Operating : 5˚C to 35˚C, Storage : 0˚C to 40˚C
Ambient
conditions
Relative humidity Operating : 20% to 80%, Storage : 20% to 90% (non-condensing)
Power supply AC100 - 240V, 50/60Hz
Power consumption/at standby 320W / <3W
Audio output speaker (12W + 12W (6Ω))
(RGB input)
RGB1 DVI input terminal (DVI-D)
RGB1 audio input terminal (3.5mm Stereo Mini Jack)
Input terminals
RGB2 analog RGB input terminal (D-sub 15-pin)
RGB2 audio input terminal (3.5mm Stereo Mini Jack)
Input signals
Video signals 0.7 V/1.0 Vp-p, analog RGB (Recommended Signal)
H/V separate, TTL level [2KΩ]
Sync signals H/V composite, TTL level [2KΩ]
Sync on green, 0.3 Vp-p [75Ω]
Recommended signal 44 modes
• The monitor takes at least 30 minutes to attain the status of optimal picture quality.

Signal Input

RGB terminal (D-sub 15-pin connector)
Pin Input signal
1
2 G or sync on green
3
4 No connection
5 No connection
6
7
8
9 No connection
10
11 No connection
12
13 H. sync or H/V composite sync
14 V.sync. [V.CLK]
15
R
B
R.GND
G.GND
B.GND
GND
[SDA]
[SCL]
Approx. 55 inches (1229 (H) x 691 (V) mm, diagonal 1410mm)
1366 (H) x 768 (V) pixels
1394 (W) x 857 (H) x 105 (D) mm
63.5kg
530W / <3W
speaker (12W + 12W (6Ω)) , sub woofer terminal (RCA)
• When different kinds of input signals are simultaneously input to
the monitor via a graphics board or the like, the monitor will
automatically select the signals in the following priority order:
Sync signal type
H/V separate sync.
H/V composite sync.
sync.on Green *
*Even in the case of the recommended signals shown on the
following page, there may be instances when correct display is
not possible. In this case, use H/V separate sync, H/V composite
sync.
Priority
1
2
3