You may follow the progress of your dryer with the drying Status
Select the drying cycle that matches the type of load you are
drying. See Auto Dry chart or Timed Preset Cycle Settings chart.
The Timed Cycle light glows green during a Timed Cycle.
The Wet light glows green at the beginning of Auto Dry if a wet
item is detected or in a timed cycle after 5 minutes.
In an Auto Cycle, if a wet item is not detected after 5 minutes,
the dryer will run for a preset minimum run time (based on the
selected cycle and dryness level setting) and then go into
Cool Down. The Cool Down and WRINKLE GUARD ®
indicators will glow green, if selected.
In a Timed Cycle, the Wet light will glow green after 5 minutes
and remain on until the dryer enters Cool Down.
The Damp light glows green in an Auto Cycle when the laundry is
80% dry. This is useful when you want to remove
lightweight items in a mixed load to avoid overdrying or remove
partially dry items that may need ironing. To be alerted when the
load is about 80% dry, you may use the damp dry signal option.
See Damp Dry Signal in "Options."
The Cool Down light glows green during the cool down part of
the cycle. Laundry cools for ease in handling.
The Clothes Dry light glows green when the drying cycle is
finished. This indicator stays on during WRINKLE GUARD_L
The WRINKLE GUARD _ light glows green when this option is
selected. This indicator stays on with Clothes Dry.
Est. Time light glows green when moisture
sensing strips in the dryer drum are measuring the amount of
moisture in the clothes. The estimated time display may adjust to
show a more accurate drying time.
Other indicator lights show Cycle, Options, Modifiers, End of
Cycle and Control Lock settings selected. The display shows the
estimated or actual time remaining.
Auto Cycles allow you to match the cycle to the load you are
drying. See the following Auto Dry Preset Cycle Settings chart.
Each cycle dries certain fabrics at the recommended
temperature. A sensor detects the moisture in the load and
adjusts the drying time for optimal drying.
Use this cycle to get high heat for heavyweight
cotton towels or bedspreads.
Use this cycle to get medium high heat for drying denims.
Use this cycle to get medium heat for drying sturdy fabrics such
as work clothes and sheets.
Use this cycle to get low heat for drying no-iron fabrics, such as
sport shirts, casual business clothes and permanent press
Use this cycle to get extra-low heat to gently dry items such as
lingerie, blouses or washable knit fabrics.
Auto Dry Preset Cycle Settings
Heavyweight mixed loads,
cotton towels, bedspreads
Denim jeans, jackets
Corduroys, work clothes,
Lingerie, blouses, washable
*Estimated Time with Auto Dry Level (Normal) setting. Time will
vary depending on load type and load size.