Before Operating; Your Washer; Cycle Selection; Operating Steps - Kenmore 7972 - 700 7.5 cu. Ft. Capacity Gas Dryer Operating Instructions Manual

@
Washer Operating Instructions
Laundry Center Model 97922/979 72
WASH/RINSE TE_SPEB£=I/_ RE WATEB LEVEL
_4EI}I/JM
WA/_M COLD tOAD
W,qSM COLD
I(}A_>
_S, RE<_ES
SPIN
f_J/,_Y_ s/w/7 PERM PRESS
_WSH m ,;lOs, PREWASH
Before Operating Your Washer
Readyour Washer Owner's Guide. It has im porta nt safety
and warranty information. It also has many suggestions for
best washing results.
5. If desired, add liquid fabric softener to fabric
softener dispenser. DO NOT pour fabric softener
directly onto wash load.
Cycle Selection
Push in and turn the Cycle Selector knob clockwise to
the desired cycle, For best results, follow the
washing instructions on the fabric care labels,
To reduce the risk of fire, electric shock, or
injury to persons, read the IMPORTANT SAFETY INSTRUC-
TIONS in your Washer Owner's Guide before operating this
appliance.
Operating Steps
Read Washing Procedures in your Owner's Guide. It
explains these operating steps in detail.
1. Sort laundry into loads that can be washed together.
2. Prepare items for washing.
3. Pretreat stains and heavy soil.
4. Addthemeasuredamountofdetergenttowashtub
before adding the laundry load.
5. If desired, add liquid bleach to bleach dispenser. DO
NOT pour bleach directly onto the load.
Printed in U.S.A.
7. Add laundry load loosely to wash tub. Dry load
should not be higher than top of agitator vanes.
For best results, DO NOT overload.
8. Select the wash cycle and settings according to type,
size and soil level of each load.
9. Close lid and pull out Cycle Selector knob to start
washer. The washer will fill with water but will not agitate
or spin with the lid open.
To stop the washer, push in the Cycle Selector knob. To
change a cycle, push in the Cycle Selector knob and turn
it clockwise to the desired setting. Pull out the knob to
restart the washer.
10. Remove items at end of cycle. Wait about 2-3 minutes
for safety lid lock to release.
The Regular, Perm Press and Delicates cycles progress
through wash agitation, drain and spin with a spray
rinse, rinse agitation, and a spray rinse during the final
spin.
Regular Cyde
This cycle provides up to 15 minutes of normal agitation and
a fast spin for most fabrics.
Extra Rinse Cycle
Use the Extra Rinse cycle after any complete wash cycle
when an additional deep rinse may be needed to remove
excess detergent and soil. It provides 3 minutes of rinse
agitation in cold water, followed by a spray rinse at the
selected rinse water temperature during spin.
If desired, add liquid fabric softener to the rinse water or use
a softener sheet in the dryer. DO NOT pour fabric softener
directly onto the load.
P/N 134818600(061 I)