Replacing the Fusing Unit
R CAUTION:
• The fusing unit becomes very
hot. When installing the new fus-
ing unit, turn off the printer and
wait about an hour. After that, in-
stall the new fusing unit. Not
waiting for the unit to cool down
can result in a burn.
Replacing the fusing unit
A
Open the rear cover by pushing the
two knobs.
B
Remove the rear cover in a horizon-
tal direction.
C
Lift the lock levers of the fusing
unit as shown in the illustration.
D
Pull the fusing unit out.
E
Pull out the pins on both sides of
AGN004S
the new fusing unit.
ZKGX220E
Replacing the Maintenance Kit
AGN006S
AGN007S
ZKGM010E
2
39