Ricoh AP610N - Aficio B/W Laser Printer Maintenance Manual page 81

F
Close the cover of the duplex unit.
Removing misfed paper inside the
duplex unit
A
Push down the lever on the right
side of the duplex unit ( ), and
then pull it out until it stops ( ).
When "Remove Misfeed Duplex Unit" Appears
B
Lift the guide board inside the
duplex unit, and then remove the
misfed paper.
ZKGY360E
Important
❒ When A5L paper misfeeds, you
might not be able to remove it by
pulling the duplex unit out. In
this case, pull the paper tray out,
and then remove the paper.
C
Align the power cable with the
groove of the left slide of the du-
plex unit, and then insert the du-
plex unit into back of the printer
aligning the rails inside of the
printer until it is connected.
ZKGX320E
Reference
If the error message appears
again, the misfed paper might
be left in the printer. Confirm
that any torn paper scraps are
not in the inside of the printer.
For more information, see p.71
"When "Remove Misfeed Inter-
nal Path" Appears".
ZKGY440E
6
ZKGX240E
77