Ricoh Aficio SP C811DN Software Manual page 285

Message
child process exec error! (process name)
Client password rejected
Client tls certificate rejected
Connected DHCP Server(<DHCP serveraddress>). The IP address was successfully received from the
Could not attach to FileServer<error number>
Could not attach to PServer<print server>
Current Interface Speed: xxxMbps
Current IP address <current IP address>
Current IPX address<IPX address>
DHCP lease time expired.
DHCP server not found.
dhcpcd start
dpsd is disabled.
Problem and solutions
The network service failed to start. Turn the printer
off and then on. If this does not work, contact your
service or sales representative.
The client's password was rejected. Check the client
password.
The client's TLS certificate was rejected. Check the
certificate.
DHCP server.
(In the remote printer mode) Connection to the file
server has not been established. The file server has
refused the connection. Check the file server con-
figuration.
(In the remote printermode) Connection to the print
server has not been established. The print server
has refused the connection. Check the print server
configuration.
Speed of the network (10Mbps, 100 Mbps, or
1Gbps).
Current IPv4 address.
Current IPX address
DHCP lease time has expired. The printer tries to
discover the DHCP server again. The IP address
until now becomes invalid.
The DHCP server was not found. Make sure that the
DHCP is on the network.
The DHCPCD service (dhcp client service) has start-
ed.
Communication via PictBridge is unavailable be-
cause PictBridge is disabled in the security mode.
Enable PictBridge in the security mode.
Message List
6
283