Selecting The Display Language - Ricoh Aficio SP C232DN Operating Instructions Manual

C
Turn the power switch to ON.
The Ready indicator on the control panel lights up.
Note
❒ Wait until the Ready indicator turns on.
❒ The machine may make a noise while initializing. This noise does not indi-
cate a malfunction.

Selecting the Display Language

Select a language using the procedure described here. The message for the se-
lected language will appear on the display. If you want to use the display in Eng-
lish, the following procedures are unnecessary.
Note
❒ The default setting is English.
A
Press the {Menu} key.
B
Press the {T} or {U} key to display [Language], and then press the {#Enter}
key.
Menu:
Language
ASH072S
ASI066S
Installing the Printer
15
2