Phone Setting - WELLTECH ATA-171 - V1.4 User Manual

3.4

Phone Setting

3.4.1 In Phone Setting contains Call Forward, SNTP Settings, Volume Settings, Block Setting,
Caller ID, Auto Dial Setting, Flash Time Setting, Call Waiting, and T.38(FAX) Setting
functions.
3.4.2 Call Forward function: you can setup the phone number you want to forward in this page.
There are three type of Forward mode. You can choose All Forward, Busy Forward, and No
Answer Forward by click the icon. You can also select forward path to forward incomig call to
IP or PSTN side.
-1- All Forward: All incoming call will forward to the number you choosed. You can input the
name(description) and the phone number in URL field. If you select this function, then all
the incoming call will direct forward to the speed dial number you choose.
-2- Busy Forward: If you are on the phone, the new incoming call will forward to the number
you choosed. You can input the name(description) and the phone number in URL field.
-3- No Answer Forward: : If you can not answer the phone, the incoming call will forward to
the number you choosed. You can input the name(description) and the phone number in
URL field. Also you have to set the Time Out time for system to start to forward the call to
the number you choosed.
-4- When you finished the setting, please click the Submit button.
-5- If there is nothing need to change, please click the Save Change Item in the left side, then
click the Save button. The change you made will save into the system and the system will
Reboot automatically.
ATA-171/172/171P (ATA-S1/S2/P)
Figure 3. Speed Dial
6
User's Guide