WELLTECH ATA-171 - V1.4 User Manual page 33

1 ?
2 -t
3 -m
4 -i
5 -nm
6 -g
7 -dns0
8 -dns1
9 -dr
10 -nat
11 on
12 off
13 -dhcps
14 -ddns
15 -bridge
16 -dev0
17 -dev1
18 -dev2
19 (null)
-4- save function
Index Command
1 ?
2 -book
3 -sys
-5- reboot function is to restart the system.
-6- exit function is to exit the CLI.
-7- debugmode function is to enter the debugmode.
-8- update function
Index Command
1 ?
2 -os
3 -dsp
4 -all
5 -server
6 -pcm
-alaw
-ulaw
-g729
-g723
-g726.16
-g726.24
-g726.32
-g726.40
IP is the TFTP server's IP address, and the filename is the image you want to download into the
system.
-9- auth function
Index Command
1 ?
2 -admin
3 -sys0
ATA-171/172/171P (ATA-S1/S2/P)
Show 'ipconfig -ifN' Option
Set Host Type
Set MAC Address
Set IP Address
Set Net Mask
Set Gateway
Set Primary DNS server
Set Secondary DNS server
Set Default Route
Set NAT
Enable Interface
Disable Interface
DHCP Server Setting
Set DDNS
Set Bridge
Set Device 0 Setting
Set Device 1 Setting
Set Device 2 Setting
Show Interface Setting
Description
Show 'save' Option
Save phone book
Save system setting
Description
Show 'update' Option
Update OSImage(IP filename)
Update DSP Image(IP filename)
Update All Image(IP filename)
Update Server (IP filename length)
PCM(IP filename)
alaw (IP filename)
ulaw (IP filename)
g729 (IP filename)
g723 (IP filename)
g726.16 (IP filename)
g726.24 (IP filename)
g726.32 (IP filename)
g726.40 (IP filename)
Description
Show 'auth' Option
Change Administrator user name/password
Change System user0 user name/password
32
User's Guide