Keypad Interface For The Ata - WELLTECH ATA-171 - V1.4 User Manual

2

Keypad Interface for The ATA

You can use the PSTN phone keypad to operate the ATA. Please follow the instruction to configure
your terminal adapter.
Group IVR Action
Dial out from
Funcrion
PSTN Line
Unlock keypad
Function
setting
Function Reboot
Function Factory Reset
Check WAN IP
Info
Address
Check LAN IP
Info
Address
Info Check IP Type
Check the Phone
Info
Number
Check Network
Info
Mask
Check Gateway
Info
IP Address
Check Primary
Info DNS Server
Setting
Check Firmware
Info
Version
Setting Set DHCP client
Set Static IP
Setting
Address
Set Network
Setting
Mask
Set Gateway IP
Setting
Address
Set Primary DNS
Setting
Server
Setting Set Codec
Set Handset
Setting
Gain
Set Handset
Setting
Volume
IVR Menu Choice
0¡ ¯
#190#
#195#
#198#
#126#
#120#
#121#
#122#
#123#
#124#
#125#
#128#
#111#
#112xxx*xxx*xxx*xxx#
#113xxx*xxx*xxx*xxx#
#114xxx*xxx*xxx*xxx#
#115xxx*xxx*xxx*xxx#
#130+[1-8]#
#131+[00~15]#
#132+[00~12]#
ATA-171/172/171P (ATA-S1/S2/P)
Parameter(s)
None
None
None
None
None
None
None
None
None
None
None
None
None
Enter IP address using numbers on
the telephone keypad. Use the *
(star) key when entering a decimal
point.
Enter value-using numbers on the
telephone keypad. Use the * (star) key
when entering a decimal point.
Enter IP address using numbers on
the telephone keypad. Use the *
(star) key when entering a decimal
point.
Enter IP address using numbers on
the telephone keypad. Use the *
(star) key when entering a decimal
point.
1:G.711 u-Law, 2: G.711 a-Law, 3:
G.723.1, 4: G.729a, 5: G.726 16K, 6:
G.726 24K, 7: G.726 32K, 8: G.726
40K,
Handset Gain from 0~15
Handset Volume from 0~12
3
User's Guide
Notes:
Press O# can pass relay to PSTN
Line, user can dial out from PSTN
Line. (For 171P only)
After you unlock keypad setting,
then you may configure the ATA.
After you hear "Option Successful,"
hang-up. The system will reboot
automatically.
System will automatically Reboot.
WARNING: ALL "User-Changeable"
NONDEFAULT SETTINGS WILL
BE LOST! This will include network
and service provider data.
IVR will announce the current WAN
IP address of the ATA
IVR will announce the current LAN
IP address of the ATA
IVR will announce if DHCP in
enabled or disabled.
IVR will announce current in use
VoIP number
IVR will announce the current
network mask of the ATA.
IVR will announce the current
gateway IP address of the ATA.
IVR will announce the current
setting in the Primary DNS field.
IVR will announce the version of the
firmware running on the ATA.
The system will change to DHCP
Client type
DHCP will be disabled and system
will change to the Static IP type.
Must set Static IP first.
Must set Static IP first.
Must set Static IP first.
You can set the codec you want to
the first priority.
You can set the Handset gain to
proper value, default is 6
You can set the Handset volume to
proper value, default is 10