Setup The Ata By Web Browser; Login - WELLTECH ATA-171 - V1.4 User Manual

3

Setup the ATA by Web Browser

The ATA provides a built-in web server. You can use Web browser to configure the ATA. First please
input the IP address in the Web page. In the end of IP address, please add the port number ":9999". Ex:
http://192.168.1.100:9999
3.1

Login.

3.1.1 Please input the username and password into the blank field. The default setting is:
1. For Administrator, the username is: root; and the password is:
you can configure all the setting.
2. For normal user, the username is: user; and the password is: test. If you use the account login,
but you cannot configure the SIP setting.
3.1.2 Click the "Login" button will move into the ATA web based management information page.
3.1.3 If you change the setting in the Web Management interface, please do remember to click the
"Submit" button in that page. After you finished the change of the setting, click the "Save"
function in the left side, and click the Save Button. When you finished the setting, please click
the Reboot function in the left side, and click the Reboot button in that page. After the system
restart, all the setting can work properly.
ATA-171/172/171P (ATA-S1/S2/P)
Figure 1. Login
4
User's Guide
test. If you use the account login,