3.4.10 T.38 Setting function: You can Enable/Disable the T.38 function. When you finished the
setting, please click the Submit button. If there is nothing need to change, please click the
Save Change Item in the left side, then click the Save button. The change you made will save
into the system and the system will Reboot automatically.
3.5
Network
3.5.1
In Network you can check the Network status, configure the NAT Settings, Bridge Settings,
DDNS settings and VLAN Settings.
3.5.2
Network Status: You can check the current Network setting in this page.
ATA-171/172/171P (ATA-S1/S2/P)
Figure 12. T.38 (FAX) Setting
Figure 13. Network Status
12
User's Guide