If you set off the alarm by accident, unlock any door
with your key.
PASS-Key@II
You can also turn off the alarm by using the Keyless
Entry System, if you have it. The alarm won't stop if
you try to unlock a door any other way.
How to Test The Alarm
The alarm can be tested by first having the driver's
window down. Activate the system by locking the doors
with the power door lock switch or the Remote Keyless
Entry System. Get out of the car and close the door and
wait for the SECURITY light to go out. Then reach in
through the window, unlock the door with the manual
door lock, and open the door. This should set off the
alarm.
If the alarm does not sound when it should, check to see
if the horn works. The horn fuse may be blown. To
replace the fuse, see "Fuses and Circuit Breakers" in
the
Index.
To reduce the possibility of theft, always activate the
theft deterrent system when leaving your vehicle.
Your vehicle is equipped with the PASS-Key@II
(Personalized Automotive Security System) theft
deterrent system. PASS-Key% is a passive theft
deterrent system. This means you don't have to do
anything different to arm or disarm the system. It works
when you insert or remove the key from the ignition.
PASS-Key@II uses a resistor pellet in the ignition key
that matches a decoder in your vehicle.
77