Buick PARKAVENUE 1994 Manual page 102

To Resume a Set Speed
Suppose you set your Cruise Control at a desired speed
and then you apply the brake. This, of course, shuts off
the Cruise Control. But you don't need to reset it.
Once you're going about
25 mph (40 km/h) or more,
you can move the Cruise
Control switch from
"ON" to ",/A"
(Resume/Accelerate) for
about half a second. You'll
go right back up to your
chosen speed and stay
there.
Remember if you hold the switch at
"Re~~me/Accelerate" longer than half a second, the
vehicle will keep going faster until you release the
switch or apply the brake. You could be startled and
even lose control. So unless you want to go faster, don't
hold the switch at "Resume/Accelerate."
To Increase Speed While Using Cruise
Control
There are two ways to go to a higher speed. Here's the
first:
1. Use the accelerator pedal to get to the higher speed.
2. Push the button at the end of the lever, then release
the button and the accelerator pedal. You'll now
cruise at the higher speed.
100