Buick PARKAVENUE 1994 Manual page 248

Table of Contents

Advertisement

2. Push
it back in all the way, wait three seconds and
then pull it back
out
again.
3. Check both sides of the dipstick, and read the lower
level. The fluid level must be in the cross-hatched
area.
4. If the fluid level is in the acceptable range, push the
dipstick back in all the way.
How to Add Fluid
Refer
to
the Maintenance Schedule to determine what
kind of transaxle fluid to use. See "Recommended
Fluids and Lubricants'' in the Index.
If the fluid level is low, add only enough of the proper
fluid to bring the level into the cross-hatched area on the
dipstick.
1.
2.
e
0
Pull out the dipstick.
Using a long-neck funnel, add enough fluid at the
dipstick hole to bring
it
to the proper 1evel.It doesn't
take much fluid, generally less than a pint (OSL).
Don't overfill. We recommend you use only fluid
labeled DEXRON@-111 or DEXRON@-IIE, because
fluids with that label are made especially for your
automatic transaxle. Damage caused by fluid other
than DEXRON@-I11 or DEXRON@-IIE is not
covered by your new vehicle warranty.
After adding fluid, recheck the fluid level as
described under "How to Check."
When the correct fluid level is obtained, push the
dipstick back in all the way.
246

Advertisement

Table of Contents
loading

This manual is also suitable for:

1994 park avenue

Table of Contents