Buick PARKAVENUE 1994 Manual page 116

3. Now
install the selected
pin into the specified
hole on the lever as
indicated from the chart.
4. While holding the panel and lever, place the panel
over your garage door opener so that the button is
over the pin.
5.
Remove the backing from the adhesive strips
on the
panel and place your garage door opener on the
panel.
6. If the adhesive strips
won't hold your opener
in place, tie down loops
may be used.
7. Place the tabs from the
panel into the slots on
the cover so that pivots
are positioned as shown.
114