iDect X3I SYSTEM User Manual page 49

Remote operation
You need to enter a three-digit pass number if you want to dial
home to receive your messages. The original pass-number is
321. Otherwise you are able to set your own three-digit pass
number (please see page 39).
To check your messages remotely
1 Using a tone dialling phone, dial your home number
2
When you hear your outgoing message, press the STAR
and you will hear 'Security code' and a 'beep'.
3
Enter your remote security code and your will hear a long 'beep'.
4
Press '2' on your handset to play back your messages and/or use
the keys listed in the table overleaf.
Note:
At steps 2, 3 and 4, you must press the key within 7 seconds, or the machine will
cut off your call.
At step 3, if you key in the wrong code, you can try again. You have up to three
attempts to get the code right before the machine cuts off your call.
Remote operation keys
Keys to press during remote operation
Interrupt and bypass the outgoing message (OGM)
Play new messages (after playing back new messages,
you can press this again to hear all recorded messages)
Pause and restart during message playback
Skip the current message to the next one
iDECT Help Line(for UK only): 0845 345 9677 (Local Call rate)
button
45