iDect X3I SYSTEM User Manual page 32

Set sending centre number
1 Press the MESSAGE button.
à The display shows SMS >New Message.
2
Use the UP/ or DOWN/ button to select Settings.
3 Press the button.
à The display shows Settings > Service Centres.
4
Press the button.
5
Use the UP/ or DOWN/ button to select Sending Centre.
6 Press the button.
à The display shows Sending Centre.
(Default: 1470P17094009)
7
Press the button to clear number.
8
Use the keypad to enter the new sending centre number.
Press the button for OK.
9
à The display shows Done.
10 Press the HANG UP/C button to go back to idle mode.
Selecting message size
1 Press the MESSAGE button.
à The display shows SMS >New Message.
2
Use the UP/ or DOWN/ button to select Settings.
3 Press the button.
à The display shows Settings > Service Centres.
4
Use the UP/ or DOWN/ button to select Message Size.
5
Press the button.
6
Use the UP/ or DOWN/ button to choose 612 Chars or 160
Chars.
7
Press the button for OK.
à The display shows Done.
8 Press the HANG UP/C button to go back to idle mode.
28