4
Fit the rechargeable batteries in each handset.
A. Push down on the top of the battery
compartment cover (located on the
back of the handset) and slide the
cover off as shown.
5
Charge the batteries for 24 hours before 1 time use.
Before you use the handset for the first time, it is important that you charge
the batteries fully. You will hear a 'beep' when the handset is correctly
positioned on the charging cradle.
Leave the handset on the
The bars on the
battery level symbol
base unit or charger pod
continuously change
for 24 hours. To keep the
as the batteries are
being charged.
batteries charged, whenever
you don't need to use the
handset (such as overnight,
or when you go out), leave it
on the base unit or charger pod.
Battery life:
Standby time: 100 hours
Talk time: 10 hours
Note:
Battery life depends on device usage. Therefore, it is recommended that you
read the following notes of caution.
When the batteries are low, the handset will display the corresponding icon
. Place the handset back on the base station: the battery icon
start flashing.
6
B. Lift the battery pack and connect
its plug to the socket inside the
compartment, as shown.
BLACK
RED
Store the wire in
the gap after
installing the
battery.
st
12:58
12:58
iDECT 1
iDECT 1
Menu
Names
Menu
Names
The CHARGE
light comes on.
will
Need help?
Do you have a question about the IDECT X3I SYSTEM and is the answer not in the manual?
Questions and answers