iDect Carrera Classic User Manual

Calls are charged at local rate
Or visit our website:
www.binatonetelecom.com
Warning:The caller display will not work and you will only be able to make
and receive basic handset calls without batteries installed.
Down/Caller Display List
Up/Caller Display List
Speakerphone
volume control
Warning: If you connect the telephone to a line with a broadband (ADSL) connection, you
must use a micro-filter between the telephone and telephone line, otherwise you may get
interference between the telephone and the broadband, which could cause problems.
If you need broadband micro-filters, contact your broadband supplier.
Install 3 Alkaline AAA batteries into the battery compartment in the underside of the
base, as shown below, and replace the cover before use.
Batteries are not included with the unit.
When the batteries are low,
you do not replace the batteries, they will become totally discharged and your display
screen will not work. and you may lose all the telephone memories and settings.
12
4. Plug one end of the telephone line
cord into the other socket in the
underside of the base unit, and route
the cable through the cable guide at
the back, then plug the other end into
your telephone wall socket.
will show on the right side of the display screen, If
SET/STO
SET/STO
CALLS
SET/STO
CALLS
SET/STO
CALLS
SET/STO
CALLS
SET/STO
CALLS
SET/STO
DEL
SET/STO
CALLS
SET/STO
CALLS
SET/STO
DEL
The Recall function may be required for some special
services of your network provider. During a call, pressing
the R button generates a line interruption and the length
depends on your FLASH setting. The default value is
100ms,which is correct for most UK exchanges and
should not need changing.
SET/STO
CALLS
SET/STO
CALLS
SET/STO
DEL