Table of Contents
Advertisement
164
Trimming in the Source window
One way which you can use to trim your videos is to use the Source
window.
To trim a video in the Source window:
1. Double-click a video clip in the Timeline.
2. In the Source window, drag the Jog bar to the position you want as the
mark-in point and then press [
3. Drag the Jog bar to the position you want as the mark-out point and then
press [
4. Click Apply in the Source window.
Tip: Use the left-arrow or right-arrow key on your keyboard to go through your video
frame by frame. Each key press moves you one frame forward or back. You can also
hold down [
useful if the video clip duration is very long or you want to make precise trimming.
You can also use the Source window to cut your video clips. Video Editor
gives you two options on how you can cut your video clips: Cut by
Position and Cut by Cue. Cut by Position slices the video clip based on the
position of the Jog bar. Cut by Cue slices the video clip based on the cue
positions.
MEDIASTUDIO PRO USER GUIDE
4].
F
] and use the mouse to drag the Jog bar. This feature is particularly
SHIFT
3].
F
Cut options
Advertisement
Table of Contents
