Table of Contents
Advertisement
172
SOURCE WINDOW NAVIGATION BAR
1. Play (Pause) plays the entire clip from beginning to end.
2. Play Mark Area (Pause) plays only the trim area from Mark-in to Mark-out point.
3. Play from the current position to Mark-out (Pause) plays the clip from the
current position of the Jog bar to the Mark-out point.
4. Previous Edit Point moves the Jog bar to the previous cue or the beginning of
the clip.
5. Previous Frame moves the Jog bar to the previous frame.
6. Next Frame allows you to maneuver the Jog bar one frame at a time.
7. Next Edit Point moves the Jog bar to the previous or next cue or the end of the
clip.
8. Repeat plays the active clip continuously.
9. Mark-in and Mark-out position the Trim Handles at the current location of the
Jog bar and adjust the Trim Area.
When trimming videos in the Source
window (see page 165), the entire trim area
can be repositioned by dragging it. The Jog
bar automatically slides along with while
dragging on the Trim bar.
The pointer will change to a hand when placed over the trim area. Use this
hand to drag the two trim handles when trimming and moving the trim area
as a whole. Right-click on the trim area to automatically reset both trim
handles to their original positions at the beginning and end of the original
clip. Both the Current Position display and Trim Area display boxes can
be manually edited. Just click on the box and key in the new numbers to
automatically readjust the Jog bar and/or Trim bar.
MEDIASTUDIO PRO USER GUIDE
1
2
3
4
5
9
6
7
8
Sliding the Trim bar
Advertisement
Table of Contents
