Trimming Titles Or Audio Clips - Ulead DVD WORKSHOP 2 User Manual

64 ULEAD DVD WORKSHOP USER GUIDE

Trimming titles or audio clips

Your captured videos may have excess footage at the beginning or at the end that
you may want to remove. The Navigation Panel allows you to trim your videos as
accurately as possible.
To trim using the Jog Bar and Mark-in/Mark-out buttons:
1. Drag the Jog Bar or click Previous or Next on the Navigation Panel to move
to the frame where you want the clip to start. This will be your mark-in point.
2. Click Mark-in or press [F3] to set the mark-in point.
3. Move to the frame where you want the clip to end. This will be your mark-out
point.
4. Click Mark-out or press [F4] to set the mark-out point.
To trim using the Trim Bar:
1. Select the video clip you want to trim.
2. To set the mark-in time, drag the left Trim Bar slider to the desired position.
The Mark-in time is displayed in the Options Panel.
3. To set the mark-out time, drag the right Trim Bar slider to the desired position.
The Mark-out time is displayed in the Options Panel.
Note: To preview the trimmed clips, hold down [Shift] and click Play on the
Navigation Panel at the same time.