Table of Contents
Advertisement
384
Extract video
Trim your video by drawing out specific portions of your clip. This feature
allows you to select and extract multiple portions from your clip and then
modify your clip according to the portions you have extracted.
Extracting videos:
1. Click the video in the Media clip list to select it then click
The Extract Video dialog box opens.
2. To select a portion to retain, use the Jog Bar to go that section of the
video then use the In and Out buttons (or Mark-in [F3] and Mark-out
[F4] buttons on the Trim Bar). Click In when you find the start of the
portion you want then click Out when you reach the end of the portion
you want extracted.
3. Repeat step 2 as often as necessary to extract more portions from your
clip.
4. Your extracted videos will appear on the Media clip list. Preview the clips
you have extracted by pressing [
Click OK.
5. The dialog box closes and you return to the Add/Edit Media Clip step.
In the Add/Edit Media Clip step, you can see the portions you have extracted by
looking at the Trim Bar of the Preview window. The red segments on the Trim
Bar are the portions that you have extracted. Preview the clips you have
extracted by pressing [
change the portions that you have extracted from your clip, click Extract Video
again.
MEDIASTUDIO PRO USER GUIDE
SHIFT
] and clicking the play button. If you need to
SHIFT
] and clicking the play button.
.
Advertisement
Table of Contents
