Table of Contents
Advertisement
4. Select Device control if you want MediaStudio Pro to control your
video camera while recording your project.
5.
Click OK to close the dialog box and then Open to begin playing back
the sequence.
Once you click Open, your entire screen blacks out and after the specified
duration the video begins to play back. (Hit a key on the keyboard or click
your mouse to start playing if you chose the Manually with keyboard or
mouse option.) You may also want to print your movie directly from the
Timeline to video tape without creating a file.
To output directly from the Timeline to video tape:
1. Click File: Print To Tape: Timeline to open the Select Timeline dialog
box.
2. Choose whether to output the Entire project or just a selected Preview
range.
3. Select Options to open the Print To Tape Options dialog box and follow
steps 3 and 4 of the outputting an avi file procedures.
4.
Click OK to close the dialog box and then OK again to begin playing
back the sequence.
The movie then plays back while rendering, the same as it would when
rendering for a preview. After the rendering is finished, the video is played
for recording, the same as when copying an avi file to video tape.
Notes:
• Before the video starts playing, be sure to start your recording device. Once
finished, use Video Capture to play back the video directly from the video capture
source to see the results.
• To cancel or end the playback, press the [
VIDEO EDITOR: CHAPTER FOUR
] key.
ESC
239
Advertisement
Table of Contents
