Table of Contents
Advertisement
To trim an audio clip:
1. Place the red vertical line where you want to begin the trim selection
area.
2. Select the Mark-in button. The unselected area changes to a blue
waveform on a gray background.
3. Repeat steps 1 and 2 with the Mark-out button.
4. Click the Apply button. The clip on the Timeline is adjusted.
Mark-in point
Trim area
Mark-out point
Visible area
Zoom tool
Note: Additional unlabeled controls are the same as the Source window for video clips
(see page 170). Trimming the audio track of a clip with attached video will also trim the
corresponding video track.
VIDEO EDITOR: CHAPTER TWO
173
Advertisement
Table of Contents
