Table of Contents
Advertisement
shut down all other programs running in the background or defragment your
hard drive to achieve optimum results.
To capture a video sequence or an image from an analog source:
With Video Capture open, start playing the video from your video
1.
source. (The video should appear in the video window of Video Cap-
ture. If it does not, check the connection to your video source and
your video capture board setup.)
Click the Record button on the Control bar or Capture: Video
2.
open the Capture Video dialog box.
If the Display capture options before capturing option is cleared in
the Preferences dialog box, Video Capture begins capturing immediately
using your current settings.
Capture Video dialog box
Specify the desired frame rate in the Frame rate spin box. (If
3.
capturing full motion video from a drop-frame NTSC device, specify
the fractional frame rate of 29.97.)
Remember that the higher the frame rate, the more demand on your
resources and the greater the size of the resulting video file. As a
VIDEO CAPTURE: CHAPTER TWO
89
to
[
]
5
F
Advertisement
Table of Contents
