Customizing Your Capture Options - Ulead MEDIASTUDIO PRO 7 User Manual

92

Customizing your capture options

In the Capture Video dialog box, the Advanced tab contains options that
allow you to customize the way that each capture is performed. By
carefully selecting these options to match your system's performance, you
can significantly improve overall capture results.
CAPTURE VIDEO DIALOG BOX: ADVANCED TAB
1. Display message box before capturing displays a confirmation message
dialog box after you have clicked OK. (This is useful if you want to wait before
capturing.) When clear, capturing starts immediately after clicking OK. (This
option has no effect when the selected capture method is Manual or Device
Control.)
2. Play video file after capturing plays back each file after capturing. Leave this
clear if you want to continue viewing your video source after capturing.
3. Synchronize video with audio ensures that during capture, the video portion
maintains correct timing with the audio portion. When clear, both captures are
done independently by your system, which may result in bad synchronization
between audio and video data, particularly if the audio is a 'talking head'. If the
audio is background music, then selecting this option has little effect.
4. Display message if dropped frames exceed displays a report after capturing
whenever the specified dropped frame threshold has been met. For general
capturing, specify 10%. (If you frequently get dropped frames, try capturing at a
lower quality.) Set this to 100% if you do not mind dropped frames or are only
capturing low resolution files.
MEDIASTUDIO PRO USER GUIDE
1
2
3
4
5
6
7
8