Scanning A Dv Tape - Ulead MEDIASTUDIO PRO 7 User Manual

10. Under Output, you may choose to allow the profile to compress the
video file or not. Enter a brief description of the profile under
Description. Click Next.

Scanning a DV tape

Scanning the DV tape identifies individual clips and provides a thumbnail list
of the entire tape contents. Save the scan as a DV Album (PSF file) which
provides a log of the entire tape for future reference.
The Scan menu item and toolbar button are enabled when the DV
camcorder is on and the device control and capture plug-in have been
initialized. When you press the Scan button, Video Capture opens the Scan
DV Tape dialog box.
Scan DV Tape dialog box
Note : The dialog box should not contain any data under List view control when it is
opened.
To scan a DV tape:
1. Connect your DV camcorder to your IEEE-1394 interface card.
2. Turn your camcorder on and set it to Play mode (or VTR/VCR mode).
3. Run Video Capture. Click Capture: Scan DV Tape.
VIDEO CAPTURE: CHAPTER TWO 101