IBM 8647 - Eserver xSeries 225 Maintenance And Troubleshooting Manual page 74

11. Install the microprocessor:
64
IBM xSeries 225 Type 8647: Hardware Maintenance Manual and Troubleshooting Guide
a. Touch the static-protective package containing the new microprocessor to
any unpainted metal surface on the server; then, remove the
microprocessor from the package.
b. Pull out and lift up on the microprocessor-release lever to unlock the
microprocessor socket.
Attention:
1) Do not use excessive force when pressing the microprocessor into the
socket.
2) Make sure that the microprocessor is oriented and aligned correctly
with pin number 1 in the socket before you try to close the
microprocessor-release lever. The following illustration shows the
alignment marks for both microprocessors and sockets.
Microprocessor 1
Alignment marks
Microprocessor
socket 1
c. Center the microprocessor over the microprocessor socket. Align the
triangle on the corner of the microprocessor with the triangle on the corner
of the socket and carefully press the microprocessor into the socket.
d. Carefully close the microprocessor-release lever to secure the
microprocessor in the socket.
Microprocessor
baffle
Captive screws
Microprocessor
release lever
Microprocessor 2
Heatsink 2
Microprocessor 2
Alignment marks
Microprocessor
socket 2
DIMMs