Table of Contents
Advertisement
To replace the bezel-release latch, complete the following steps:
1. Align the bezel-release latch with the slots on the underside of the top of the
chassis, and slide it into place.
2. Replace the CD-ROM drive. See "Installing a 5.25-inch removable-media drive"
on page 56 for instructions.
3. Replace the front bezel. See "Replacing the bezel" on page 71
4. Replace the side cover. See "Installing the side cover" on page 71
5. Connect all external cables; then, connect the power cord, and plug in the
server.
6. Turn on the server.
Chapter 5. Field replaceable units
99
Advertisement
Table of Contents
Troubleshooting
