IBM 8647 - Eserver xSeries 225 Maintenance And Troubleshooting Manual page 54

4. If your server comes with a support bracket that has a fan and a fan bracket
To reinstall the support bracket, reverse the previous steps for your server.
44
IBM xSeries 225 Type 8647: Hardware Maintenance Manual and Troubleshooting Guide
attachment that looks like the bracket in the following illustration, complete the
following steps:
a. Disconnect the fan cable from the fan connector on the system board before
removing the support bracket.
b. Pull out on the rear end of the support bracket at a 45° angle.
c. Disengage the front end of the support bracket from the server and set the
bracket aside.