Appendix A: Command Line Interface Syntax - Intel SC5300AF2 - Server Platform - 0 MB RAM Installation And User Manual

Appendix A: Command Line Interface Syntax

The following Command Line Interface Syntax is used as the default for Terminal Mode CLI,
embedded CLI (using the BMC-based Telnet server), and the embedded HTTP server IPMI
Command page. Note that this syntax is slightly different than the IPMI 1.5 CLI syntax, or the CLI
syntax used with the dpccli proxy (an optional component of ISM 8.20). Table 4 lists the standard
return values. Table 5 lists the CLI command syntax.
Table 4. Standard Return Values for CLI Commands
•
ok
•
unsupported command
•
unrecognized command
•
command time-out
•
insufficient privilege
•
session in progress
Table 5. Command Line Interface Syntax
IPMI
Cmd Privilege
Level
help
health User
26
Short
Option(s)
Description
Display list of valid
commands.
Returns a brief
-C <command> description of
command
Display the health
of the target.
Intel® Management Module Installation and User's Guide
Output
IPMI Rev: x.x
FW Rev: xx.xx
Commands
...
Command: xx
PWR:zzz H:xx T:xx V:xx PS:xx C:xx
D:xx S:xx O:xx
Where:
PWR is system POWER state
H is overall Health
T is Temperature
V is Voltage
PS is Power Supply subsystem
C is cooling subsystem (Fans)
D is Hard Drive / RAID Subsystem
S is physical Security
O is Other (OEM)