Download Print this page

Hitachi CM751 - SuperScan 751 - 19" CRT Display User Manual page 7

User manual

Advertisement

THIS PRODUCT IS SUPPLIED WITH A TWO PIN MAINS PLUG FOR USE IN MAINLAND
EUROPE.
FOR THE U.K. PLEASE REFER TO THE NOTES ON THIS PAGE.
WORDING FOR CLASS I EQUIPMENT INSTRUCTION BOOKS AND LABELS
The mains lead on this equipment
value of which is indicated on the pin face of the plug.
an ASTA or BSI approved BS 1362 fuse must be used of the same rating.
detachable never use the plug with the cover omitted.
ensure it is of the same colour as that visible on the pin face of the plug.
available from your dealer.
DO NOT cut off the mains plug from this equipment.
power points in your home or the cable is too short to reach a power point, then obtain an
appropriate safety approved extension lead or consult your dealer.
Should it be necessary to change the mains plugs, this must be carried out by a competent
person, preferably a qualified electrician.
If there is no alternative to cutting off the mains plug, ensure that you dispose of it immediately,
having first removed the fuse, to avoid a possible shock hazard by inadvertent connection to the
mains supply.
WARNING: THIS EQUIPMENT MUST BE EARTHED
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
Green and Yellow = Earth, Blue = Neutral, Brown = Live.
Green & Yellow
to Earth
Blue to Neutral
As these colours may not correspond with the coloured markings identifying the terminals in
your plug, proceed as follows:
The wire which is coloured GREEN and YELLOW must be connected to the terminal in the plug
which is marked with the letter E or by the earth symbol @ or coloured GREEN or GREEN and
YELLOW.
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured
BLUE or BLACK.
The wire coloured BROWN must be connected to the terminal marked with
the letter L or coloured BROWN or RED.
is supplied with a moulded plug incorporating a fuse, the
Should the fuse need to be replaced,
If a replacement fuse cover is required,
If the plug fitted is not suitable for the
If the fuse cover is
Fuse covers are
Brown to Live
Fuse
Cord Clamp

Advertisement

loading

This manual is also suitable for:

Cm751etCm752etCm753et