Download Print this page

Hitachi CM751 - SuperScan 751 - 19" CRT Display User Manual page 6

User manual

Advertisement

WARNING : This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
connected.
Instructions to Users
Communication Commission) equipments provided that following conditions are met.
(1) Power cord : Unshielded power cord must be used.
(2) Video inputs : The input signal amplitude must not exceed the specified level.
CAUTION
: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Class B Personal Computers and Peripherals;
CPU Boards and Power Supplies used with Class B Personal Computers:
Nissei Sanevo America, Ltd.
We:
200 Lowder Brook Drive Suite 2200, Westwood, MA. 02090- 1124 U.S.A.
Located at:
Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2
and 15 of the FCC rules as a Class B digital device.
representative unit tested and found to be compliant with the standards.
continue to reflect the equipment being produced can be expected to be within the variation
accepted, due to quantity production and testing on a statistical basis as required by 47CFR 5
2.909.
Operation is subject to the following two conditions: (1) This device may not
harmful interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation.
ensuring that the equipment complies with the standards of 47CFR § § 15.101 to 15.109.
Color Monitor
Trade name:
CM751 /CM752/CM753
Model Number:
Signature of Party Responsible:
Printed name of Party Responsible:
Executed on (Date), at (Place):
NOTICE : This Class B digital apparatus complies with ICES-003.
: This equipment complies with the requirements of FCC (Federal
Declaration of Conformity
According to 47CFR. Part 2 and 15 for
The above named party is responsible for
Satoshi Tanabe
June 5. 1998.' MA.. U.S.A.
This equipment
and I or
Each product marketed, is identical to the
Records maintained
cause

Advertisement

loading

This manual is also suitable for:

Cm751etCm752etCm753et