Texas Instruments TINSPIRE Manual Book page 824

View menus
Menu - View
Meter
Graph
Table
Options menus
Menu - Options
Point Options
Autoscale Settings
Derivative Settings
Print All Settings
Print Current View
Print All Views
More
812 Data Collection and Analysis
Description
Displays the Meter view of the
Vernier DataQuest™ application.
Displays the Graph view of the
Vernier DataQuest™ application.
Displays the Table view of the Vernier
DataQuest™ application.
Description
Change the way your points are
plotted on your graphs.
Set autoscale behavior during and
after data collection.
Select the number of points used in
derivative calculations. This value
affects the tangent tool, velocity, and
acceleration values.
Use to determine which Vernier
DataQuest™ view(s) will be printed
when Print All is selected within the
TI-Nspire™ software.
Note: Specifying the print settings
can be done from the computer or
handheld, however, printing is only
available from a computer.
Print the current view (Meter, Graph,
or Table).
Print all views as previously set in the
More settings.
Specify the views that apply when
"Print All" is selected.