Texas Instruments TINSPIRE Manual Book page 650

Setting up the slider
You can change many slider settings, such as Minimum and Maximum, by
clicking parts of the slider. Some settings, such as Step Size, are accessible
only through the Slider Settings dialog.
1. Right-click in the slider to display its context menu, and select
to display the Slider Settings dialog.
Settings
Handheld: Point to the slider, press
2. Use the Slider Settings dialog to enter settings for the slider. Each
setting is described below. Settings that accept a numeric value also
accept an expression that evaluates to a numeric value.
Variable
Value
Minimum
Maximum
Step Size
Style
Display Digits
Show Variable
Show Scale
638 Using Data & Statistics
Specifies which variable is assigned to the slider.
Type an available numeric variable name, or click
the drop-down arrow and select a name from the
list.
Sets the current value of the variable.
Sets the lowest value in the slider range (left or
bottom end point on the track).
Sets the highest value in the slider range (right or
top end point on the track).
Sets the size of the increment between values. The
default setting is
size, click the drop-down arrow, select
and type a positive numeric value.
Click the drop-down arrow to choose
.
Vertical
Specifies the display format of the variable's current
value. Choose
Auto
to the Document Settings option. Click the drop-
down arrow to choose from floating-point or fixed
formats.
Shows or hides the variable name in the slider.
Shows or hides the scale in a maximized slider.
/ b
, and select
. To enter a specific
Automatic
to display the value according
.
Settings
,
Enter Size
or
Horizontal