Texas Instruments TINSPIRE Manual Book page 454

View
Plane Geometry
3D Graphing
Hide (Show) Analytic
Window
Hide (Show) Axes
Show (Hide) Grid
Hide (Show) Entry Line Hides or displays the entry line on the
Show (Hide) Scale
Show (Hide) Axes End
Values
Show (Hide) Table
442 Graphs & Geometry
Places the work area in geometry mode
and displays a work area with a scale, but
no axes, grid, or entry line until you
select Show Analytic Window from the
View menu.
Displays a work area for defining and
graphing functions of the form z(x,y).
Also changes the Graphs & Geometry
menu to show commands for 3D
graphing.
Opens a small graphing window on a
plane geometry work area. Places the
Graphs & Geometry work area in
modeling mode. This tool can be used
only after Plane Geometry is selected.
Hides the axes if they are currently
displayed on the page. Displays the axes
if none are displayed on the page.
Turns the grid on or off for the work area
or the analytic window. Objects can be
attached to the grid when the grid is
displayed.
page.
Toggles between showing and hiding the
scale legend on the work area. When the
scale is shown, the value and/or units can
be changed to desired values/units. This
applies only to geometric constructions.
Toggles between showing and hiding the
lowest value and highest value on the
horizontal and vertical axes.
Toggles between showing and hiding a
table of values associated with a graph.