Texas Instruments TINSPIRE Manual Book page 547

2. Select one of the three Surface color options:
color by height
– If you choose Top/bottom color, click the color swatches to select
colors for the top and bottom surfaces.
– If you choose to vary color by height or steepness, colors are
determined automatically.
3. To set the Wire color, click the color swatch and select a color.
To set other attributes of a graph:
1. Display the graph's context menu, and then select
can set the following attributes for the selected graph.
– format: surface+wire, surface only, or wire only
– x resolution (enter a value in range 2-200*, default=
– y resolution (enter a value in range 2-200*, default=
– transparency (enter a value in range 0-100, default=
– shading (controls highlights, enter a value in range 0-100,
default=
50
* Handhelds are limited to a maximum display resolution of 21,
regardless of the value entered.
2. Set the attributes as you like. If necessary, refer to "Changing an
attribute of an object" in this chapter.
·
3. Press to accept the changes.
, or
Vary color by steepness
)
Top/bottom color
.
Attributes
)
21
)
21
)
30
Graphs & Geometry
,
Vary
. You
535