Table - Cisco WS-C6503 Manual

Appendix B Port, Cable, and Connector Specifications
Console Port Mode 1 Signaling and Pinouts
This section provides the signaling and pinouts for the console port in mode 1 (CONSOLE PORT MODE
switch in the in position).
DB-9 Adapter (for Connecting to a PC)
Use the RJ-45-to-RJ-45 rollover cable and RJ-45-to-DB-9 female DTE adapter (labeled "Terminal") to
connect the console port to a PC running terminal emulation software.
asynchronous serial console port, the RJ-45-to-RJ-45 rollover cable, and the RJ-45-to-DB-9 female DTE
adapter.
Table B-1
Console Port RJ-45-to-RJ-45
Signal
RTS
DTR
TxD
GND
GND
RxD
DSR
CTS
1. Pin 1 is connected internally to Pin 8.
OL-7397-03
Port Mode 1: Console Port Signaling and Pinouts (DB-9 Adapter)
Rollover Cable
RJ-45 Pin RJ-45 Pin
1
1 8
2 7
3 6
4 5
5 4
6 3
7 2
1
8 1
RJ-45-to-DB-9 Console
Terminal Adapter Device
DB-9 Pin Signal
8 CTS
6 DSR
2 RxD
5 GND
5 GND
3 TxD
4 DTR
7 RTS
Catalyst 6500 Series Supervisor Engine Guide
Console Port
Table B-1 lists the pinouts for the
B-3