Table of Contents
Advertisement
Chapter 1
Product Overview
Table 1-4
Part Number
DWDM-SFP-5898=
DWDM-SFP-5979=
DWDM-SFP-6061=
DWDM-SFP-6141=
1. Not supported in the SFP+ slots (2 and 4) on the C3KX-NM-10G.
2. Not supported on the C3KX-SM-10G
3. Not supported for NEBS.
4. DOM = digital optical monitoring.
Table 1-5
Part Number
SFP-10G-LR=
SFP-10G-SR=
SFP-10G-LRM=
SFP-H10GB-CU1M=
SFP-H10GB-CU3M=
SFP-H10GB-CU5M=
For information about SFP modules, see your SFP module documentation and the
SFP+ Modules" section on page
Specifications."
The Catalyst 3560-X switch supports the SFP module patch cable (CAB-SFP-50CM), a 0.5-meter,
copper, passive cable with SFP module connectors at each end. This cable is only used with 1-Gigabit
Ethernet SFP ports to connect two Catalyst 3560-X switches in a cascaded configuration.
LEDs
You can use the switch LEDs to monitor switch activity and its performance.
Catalyst 3750-X switch LEDs and the Mode button that you use to select a port mode.
OL-19593-02
Supported Cisco SFP Modules (continued)
Description
DWDM SFP 1558.98-nm SFP (100 GHz ITU grid)
DWDM SFP 1559.79-nm SFP (100 GHz ITU grid)
DWDM SFP 1560.61-nm SFP (100 GHz ITU grid)
DWDM SFP 1561.42-nm SFP (100 GHz ITU grid)
Supported Cisco SFP+ Modules
Description
10 GBASE LR SFP+ transceiver module for SMF, 1350 nm,
LC duplex connector
10 GBASE SR SFP+ transceiver module for MMF, 850 nm,
LC duplex connector
10 GBASE-LRM SFP+ module for MMF and SMF, 1310 nm
10 GBASE-CU Twinax SFP+ cable assembly, 1 meter (Version -02)
10 GBASE-CU Twinax SFP+ cable assembly, 3 meters (Version -02)
10 GBASE-CU Twinax SFP+ cable assembly, 5 meters (Version -02)
2-24. For cable specifications, see
Catalyst 3750-X and 3560-X Switch Hardware Installation Guide
Front Panel Description
"Installing SFP and
Appendix B, "Connector and Cable
Figure 1-3
shows the
1-9
Advertisement
Table of Contents
