Table of Contents
Advertisement
Chapter 2
Switch Installation
Rack-Mounting
To install the switch in a 19-inch rack, follow the instructions described in this section.
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special
Warning
precautions to ensure that the system remains stable. The following guidelines are provided to
ensure your safety:
•
•
•
The 19-inch brackets are included with the switch. Installing the switch in other rack types requires an
optional bracket kit not included with the switch.
numbers.
OL-19593-02
This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest
component at the bottom of the rack.
If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in
Statement 1006
the rack.
Figure 2-15
shows the mounting brackets and part
Catalyst 3750-X and 3560-X Switch Hardware Installation Guide
Installing the Switch
2-15
Advertisement
Table of Contents
