Table of Contents
Advertisement
Chapter 1
Product Overview
SFP and SFP+ Modules
The SFP and SFP+ modules provide copper or fiber-optic connections to other devices. These
transceiver modules are field-replaceable, providing the uplink interfaces when installed in an SFP
module slot. The SFP modules have LC connectors for fiber-optic connections or RJ-45 connectors for
copper connections.
Use only Cisco SFP modules on the switch.
The (downlink) SFP module slots on the Catalyst 3750-X-12S and Catalyst 3750-X-24S switch front
Note
panel support any combination of standard SFP modules. SFP+ modules are not supported.
Table 1-4
Part Number
GLC-GE-100FX=
GLC-LH-SM=
GLC-SX-MM=
GLC-T=
GLC-ZX-SM=
GLC-BX-D=
GLC-BX-U=
CWDM-SFP-1470=
CWDM-SFP-1490=
CWDM-SFP-1510=
CWDM-SFP-1530=
CWDM-SFP-1550=
CWDM-SFP-1570=
CWDM-SFP-1590=
CWDM-SFP-1610=
SFP-GE-S=
SFP-GE-L=
OL-19593-02
Supported Cisco SFP Modules
Description
1,2,3
100FX SFP on GE SFP ports for LAN switches
GE SFP, LC connector LX/LH transceiver
GE SFP, LC connector SX transceiver
1, 3
1000BASE-T SFP transceiver module for copper connections
1000BASE-ZX SFP module for SMF, 1550 nm
1
1000BASE-BX10 SFP module for single-strand SMF, 1490-nm TX,
1310-nm RX wavelength
1
1000BASE-BX10 SFP module for single-strand SMF, 1310-nm TX,
1490-nm RX wavelength
CWDM 1470-nm SFP Gigabit Ethernet and 1G/2G FC
CWDM 1490-nm SFP Gigabit Ethernet and 1G/2G FC
CWDM 1510-nm SFP Gigabit Ethernet and 1G/2G FC
CWDM 1530-nm SFP Gigabit Ethernet and 1G/2G FC
CWDM 1550-nm SFP Gigabit Ethernet and 1G/2G FC
CWDM 1570-nm SFP Gigabit Ethernet and 1G/2G FC
CWDM 1590-nm SFP Gigabit Ethernet and 1G/2G FC
CWDM 1610-nm SFP Gigabit Ethernet and 1G/2G FC
1000BASE-SX SFP module for MMF, 850 nm (DOM)
1000BASE-LX/LH SFP module for SMF, 1300 nm (DOM)
Catalyst 3750-X and 3560-X Switch Hardware Installation Guide
Front Panel Description
4
4
1-7
Advertisement
Table of Contents
