Video Reverse; Working Orientation - Honeywell 4820HDHM User Manual

Video Reverse

Video Reverse is used to allow the image scanner to read barcodes that are
inverted. The Off barcode below is an example of this type of barcode. If
additional menuing is required, Video Reverse must be disabled to read the
menu barcodes and then re-enabled after menuing is completed. Default = Off.
Note: Images downloaded from the unit will not be reversed. This is a setting
for decoding only.
On
* Off

Working Orientation

Some barcodes are direction-sensitive. For example, KIX codes and OCR can
misread when scanned sideways or upside down. Use the working orientation
settings if your direction-sensitive codes will not usually be presented upright to
the image scanner. Default = Upright.
Upright:
Rotate Code Clockwise 90°:
Upside Down:
Rotate Code
Counterclockwise 90°:
4 - 22