Table of Contents
Advertisement
For example, an IBM AT terminal has a Terminal ID of 003. You would scan the
Terminal ID barcode, then 0, 0, 3 from the
Programming Chart
inside the back
cover of this manual, then Save. If you make an error while scanning the digits
(before scanning Save), scan the Discard code on the
Programming
Chart,
scan the Terminal ID barcode, scan the digits, and the Save code again.
Note: The default interface is Keyboard Wedge (Term ID = 003).
Terminal ID
Save
Note: After scanning one of these codes, you must power cycle your computer.
2 - 7
Hide quick links:
Advertisement
Table of Contents
