Decode Search Mode - Honeywell 4820HDHM User Manual

Scan Centering On, then scan one of the following barcodes to change the top,
bottom, left, or right of the centering window. Then scan the percent you want
to shift the centering window using digits on the inside back cover of this
manual. Scan Save. Default Centering = 40% for Top and Left, 60% for
Bottom and Right.
Centering On
Top of Centering Window
Left of Centering Window

Decode Search Mode

There are two selectable decode (scanning) modes:
Full Omnidirectional - Searches for barcode features beginning at the center
of an image, and searches to the image's limits. This mode reads all
symbologies (including OCR), in any orientation. The Full Omnidirectional
search is very thorough which may slow performance time.
Note: This search mode is the default setting for the image scanner.
4 - 14
Full Omnidirectional
* Centering Off
Bottom of Centering Window
Right of Centering Window