Ending A Remote Control Session - Symantec PC ANYWHERE SOLUTION V 12.5 SP2 Manual

34 Establishing remote connections

Ending a remote control session

Ending a remote control session
Session end options
Table 2-8
Option
After queue ends
Generate report
Prompt user
Allow user to cancel
Message to display
Close open programs
without saving data
Either the host or remote user can end a session. After a session ends, you return
to the main Symantec Management Console window.
See "Running a remote control session"
Description
Lists the following options for ending a session:
Remain connected
Disconnect
Disconnect and lock host computer
Disconnect and log off host computer
Restart host computer
Shut down host computer
The lock computer option is available on Windows 2000, 2003
Server, XP, and Vista only.
If the host computer is running Windows 98/Me, this command
starts the Windows screen saver if one is configured on the host
computer. For added security, the host user can password-protect
the screen saver.
Automatically creates a report that contains the commands that
were executed during the session and their status. You can save
the report in HTML (.html) or comma-separated values (.csv)
format.
Notifies the user about the action that you are about to perform.
Select the number of seconds that the user has to respond to the
prompt. If the timeout period expires, the action is carried out
automatically.
Sends a confirmation prompt to the host user. This option is
available only if you select Prompt user.
Lets you type a message to send to the host user. This option is
available only if you select Prompt user.
Closes any programs that are running. The user loses any unsaved
data.
on page 16.