Setting A User Password For The Access Server; Setting A Password For The Access Server Manager - Symantec PC ANYWHERE SOLUTION V 12.5 SP2 Manual

54 Managing Access Server

Setting a user password for the Access Server

Setting a user password for the Access Server

Setting a password for the Access Server Manager

To remove a subnet or IP address, select it, and then click Remove.
2 Click Apply.
You can set a user password to control connections to the Access Server. Host
users must supply the password to dock to the Access Server. You must supply
the password to connect to a docked host through the Access Server. You set the
user password during the installation process. You can change it when necessary
to maintain security.
You can configure the host or Symantec Management Console to automatically
supply the user password to connect to the Access Server.
See "What you can do with the Access Server"
See "Docking a pcAnywhere host to the Access Server"
See "Configuring the Access Server"
To set a user password for the Access Server
1
In the Preferences window, on the Security tab, under Enter password for
Access Server connections, in the Password box, type the password.
2 In the Confirm password box, type the password again.
3 Click Apply.
You can set a password for the Access Server Manager to control access to
connection information and configuration settings. When this password is set,
you must supply the password to open the Access Server Manager.
See "What you can do with the Access Server"
See "Configuring the Access Server"
To set a password for the Access Server Manager
1 In the Preferences window, on the Security tab, check Require a password
to open the Access Server Manager.
2 In the Password box, type the password.
3 In the Confirm password box, type the password again.
4 Click Apply.
on page 44.
on page 57.
on page 50.
on page 44.
on page 50.