Symantec ALTIRIS WORKFLOW 7.0 - INSTALLATION AND CONFIGURATION GUIDE V1.0 Configuration Manual page 36

36 Installing Workflow 7.0
Configuring Workflow 7.0
the Symantec Installation Manager. However, instead of migrating, you can simply
republish all Notification Server 6.5 processes to the 7.0 platform server. Migrating
your published projects does not bring them over to the 7.0 Symantec Management
Platform server in a functional form; they will be broken when they come over to
7.0. All 6.5 projects must be updated with 7.0 components and republished on the
7.0 server for them to work. Therefore, you should republish instead of migrating.
The only advantage of migration is seeing links to your projects in the Symantec
Management Console. It can be helpful to see them in the 7.0 console even though
they will not work until you republish the projects to the 7.0 platform server.
You have the option of migrating the links to all your published Notification Server
6.5 projects while installing Workflow 7.0 through Symantec Installation Manager.
Migrating is easier if you have not yet installed Symantec Management Platform.
If you have installed the platform, you can still migrate, but there are some
additional steps.
To migrate links from Notification Server 6.5
1
On your Symantec Management Platform 7.0 server, install Workflow 7.0
through Symantec Installation Manager.
You do not need to have SMP installed on the server yet to install Workflow
7.0.
See To install Workflow 7.0 through the Symantec Installation Manager"
on page 22.
2
At the end of the installation, click Run Notification 6 Migration Wizard,
and then click Finish.
3 In the dialog box that appears, click Get Migration Wizard install package
for Notification Server 6 data report. Do not click OK.
4
In the open dialog box, copy the Symantec_Migration_Package file over to
your Notification Server 6.5 computer.
Do not click OK on the Symantec Installation Manager dialog box yet.
For reference, the migration package on your 7.0 server is in C: > Program
Files > Symantec Installation Manager > MigrationPackage.
5 On your 6.5 server, run the Symantec_Migration_Package executable file.
You should see the following dialog box when it is finished:
6 Click Ok.