Table of Contents
Advertisement
Installing Workflow Server
15
Wait at least five minutes so that the escalations run.
16
On the secondary server, open the Logging and Configuration tool, and then
look under the Log Viewer tab.
If the error level logs from your test project appear in the Log Viewer, you
have successfully installed Workflow 7.0 in the separate background
processing configuration.
See
Installing Workflow for the first time"
If you are upgrading from Workflow 6.5, see the following section:
See
Upgrading from Workflow 6.5"
After you have installed Workflow Solution in the Symantec Installation Manager
and downloaded the installation file through the Symantec Management Console,
you are ready to install Workflow Server.
See
About installing Workflow 7.0"
See
Installing Workflow Solution through Symantec Installation Manager"
on page 21.
See
Downloading the Workflow installer through the Symantec Management
Console "
on page 22.
Workflow 7.0 has a single installer. Although you must install Workflow Server,
installing other pieces of Workflow 7.0 is optional. During installation you can
select which pieces you want to install on the local computer.
See
About Workflow 7.0"
See
Installing Workflow Designer"
on page 14.
on page 15.
on page 13.
on page 9.
on page 29.
Installing Workflow 7.0
Installing Workflow Server
27
Advertisement
Table of Contents
